INFLUENCE OF RECEIPT METHODS OF POLYMERIC MICRO- AND NANOCOMPOSITES ON THEIR THERMOPHYSICAL PROPERTIES


  • A.A. Dolinskiy Institute of Engineering Thermophysics of National Academy of Sciences of Ukraine, 2a, Zhelyabova str., Kiev, 03057, Ukraine
  • N.M. Fialko Institute of Engineering Thermophysics of National Academy of Sciences of Ukraine, 2a, Zhelyabova str., Kiev, 03057, Ukraine
  • R.V. Dinzhos Nikolaev National University. named after V.A. Sukhomlinskiy, 24, Nikolska str., Mykolaev, 54030, Ukraine
  • R.A. Navrodskaya Institute of Engineering Thermophysics of National Academy of Sciences of Ukraine, 2a, Zhelyabova str., Kiev, 03057, Ukraine
Keywords: polymer micro- and nanocomposites, carbon nanotubes, thermophysical properties, methods for composites

Abstract

The results of studies of thermophysical properties of the highly conducting polymer composites based on polypropylene filled with carbon nanotubes or particles of aluminum, at using methods for acquisition of these composites based on mixing the components in dry form and in the polymer melt are given. This contains materials about the patterns of influence of these methods on the heat-conducting properties of the composites, their heat capacity, density, porosity, degree of crystallinity of the polymer matrix, and so forth are offered. The explanations of the mechanisms of this influence based on analysis of the effectiveness of formation of the percolation structures are presented.

References

Sathyanarayana S. Thermoplastic Nanocomposites with Carbon Nanotubes / S. Sathyanarayana, C. Hübner. - Structural Nanocomposites. - 2013. - P. 19-60.

Huang Y. Y. Dispersion of Carbon Nanotubes: Mixing, Sonication, Stabilization, and Composite Properties / Yan Yan Huang, Eugene M. Terentjev. - review / Peng-Cheng Ma, Naveed A. Siddiqui, Gad Marom, Jang-Kyo Kim. - Composites: Part A. - 2010. - V. 41.- P 1345-1367.

Dinzhos R. V Influence input filler method on thermal properties of systems based on thermoplastic polymers and carbon nanotubes / R. V. Dinzhos, E. A. Lisenkov, N. M. Fialko, V. V. Klepko // Physical Surface Engineering. - 2014. - V.12, №4. - P 446453. (Ukr)

Kouichi T. A Molecular dynamics study on thermal conductivity of thin epoxy polymer sandwiched between alumina fillers in heat- dissipation composite material / Kouichi Tanaka, Shuji Ogata, Ryo Kobayashi, Tomoyuki Tamura, Takahisa Kouno. - International Journal of Heat and Mass Transfer. - 2015. - V. 89.- P 714-723.

Sathyanarayana S. Influence of peroxide addition on the morphology and properties of polypropylene-multiwalled carbon nanotube composites. / S. Sathyanarayana, C. Hübner. - Composites: Part A Compos. Sci. Technol. - 2013. - V. 84.- P 78-85.

Lebovka N. I. Phase behavior, microstructure and percolation of poly (ethylene glycol) filled by multiwalled carbon nanotubes and organophilic montmorillonite. / Lebovka N. I., Lysenkov E. А., GoncharukA. I., Gomza Yu. P., Klepko V. V., Boiko Yu. P - Journal of Composite Materials. - 2011. - Vol. 45, No. 24. - Р 2555-2566.

Dolinskiy A. A. Thermal properties of polymer micro- and nanocomposites based on polycarbonate / A, A. Dolinskiy, N. M. Fialko, R. V. Dinzhos, R. A. Navrodskaya // Industrial teplotehnika.- 2015. - №2. - Р 12-19. (Rus)

Bernstein V A. Differential Scanning Calorimetry in physical chemistry of polymers / V. A. Bernstein, V. M. Egorov. - L .: Chemistry, 1990. (Rus)

Kolupaev B.S. Relaxation and thermal properties of filled polymer systems / Ed. S.Y Frenkel. - Lviv: LSU, 1980. - 203 p. (Rus)

Abstract views: 70
PDF Downloads: 78
Published
2017-08-20
How to Cite
Dolinskiy, A., Fialko, N., Dinzhos, R., & Navrodskaya, R. (2017). INFLUENCE OF RECEIPT METHODS OF POLYMERIC MICRO- AND NANOCOMPOSITES ON THEIR THERMOPHYSICAL PROPERTIES. Thermophysics and Thermal Power Engineering, 37(4), 5-13. https://doi.org/https://doi.org/10.31472/ihe.4.2015.01
Section
Heat and Mass Exchange Processes