HEAT CONDUCTIVITY OF POLYMERIC MICRO- AND NANOCOMPOSITES BASED ON POLYETHYLENE AT VARIOUS METHODS OF THEIR PREPARATION
Abstract
The results of a comparative analysis of the heat conductivity properties of polymer micro- and nanocomposites based on polyethylene obtained using methods based on the mixing of components in a dry form or a melt of a polymer matrix are submitted. For polyethylene, filled with carbon nanotubes and aluminum particles, data on the effect of methods of synthesis of composites on the values of percolation thresholds, the concentration dependence of the coefficients of heat conductivity, etc. are presented.
References
Wei Cui, Feipeng Du, Jinchao Zhao, Wei Zhang, Yingkui Yang, XiaolinXie, Yiu-WingMai. Improving thermal conductivity while retaining high electrical resistivity of epoxy composites by incorporating silicacoated multiwalled carbon nanotubes, Carbon, 2011, Vol. 49,- p. 495-500. (Eng.)
Su Yong Kwon, Il Min Kwon, Yong-Gyoo Kim, Sanghyun Lee, Young-Soo Seo. A large increase in the thermal conductivity of carbon nanotube/polymer composites produced by percolation phenomena, Carbon, 2013, Vol. 55, p. 285-290. (Eng.)
Sheng Shen, Asegun Henry, Jonathan Tong, Ruiting Zheng, Gang Chen. Polyethylene nanofibres with very high thermal conductivities, Nature nanotechnology, 2010, Vol. 5, p. 251-255. (Eng.)
Spitalsky Zdenko, Tasis Dimitrios, Papagelis Konstantinos, Galiotis Costas. Carbon nanotube-polymer composites: Chemistry, processing, mechanical and electrical properties, Progress in Polymer Science, 2010, Vol. 35, p. 357-401. (Eng.)
Hernandez-Montelongo J., Naveas N., Degoutin S., Tabary N., Chai F. , Spampinato V., Ceccone G., Rossi F., Torres-Costa V., Manso-Silvan M., Martel B. Porous silicon- cyclodextrin based polymer composites for drug delivery applications, Carbohydrate Polymers, 2014, Vol. 110, p. 238-252. (Eng.)
Diaz-Bleis D., Vales-Pinzon C., Freile-Pelegrin Y., Alvarado-Gil J.J. Thermal characterization of magnetically aligned carbonyl iron/agar composites, Carbohydrate Polymers, 2014, Vol. 99, p. 84-90. (Eng.)
Samanvaya S., Jennifer L. Schaefer, Zichao Yang, Zhengyuan Tu, Lynden A. Archer. Polymer- Particle Composites: Phase Stability and Applications in Electrochemical Energy Storage, Advansed Material, 2014, Vol. 26, p. 201-234. (Eng.)
Sathyanarayana S., Hübner C. Thermoplastic Nanocomposites with Carbon Nanotubes, Structural Nanocomposites, 2013, p. 19-60. (Eng.)
Huang Y. Y., Terentjev E. M. Dispersion of Carbon Nanotubes: Mixing, Sonication, Stabilization, and Composite Properties, Polymers, 2012, V. 4, p. 275-295. (Eng.)
Peng-Cheng Ma, Naveed A. Siddiqui, Gad Marom, Jang-Kyo Kim. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review, Composites: Part A, 2010, Vol. 41, p. 1345-1367. (Eng.)
Dinzhos R.V, Lysenkov E. A., Fialko N. M., Klepko V. V Influence of the method of filling the filler on the thermophysical properties of systems based on thermoplastic polymers and carbon nanotubes, Physical engineering the surface, 2014, Vol.12, №4, p. 446-453. (Ukr.)
Malezhik A.V., Sementsov Yu.I., Yanchenko V.V. Synthesis of carbon nanotubes by catalytic decomposition, Journal of Applied Chemistry, 2005, Vol.78, p. 938-943. (Rus.)
Lemesh N.V., Lysenkov E.A., Gomza Yu.P. and etc. Structure of multilayered carbon nanotubes obtained by catalytic decomposition of ethylene on nickel nanoparticles, Ukrainian Chemical Journal, 2010, Vol. 76, №5, p. 29-36. (Rus.)
Giovanni A. L. A Steady-State Apparatus to Measure the Thermal Conductivity of Solids, Int. J. Thermophys, 2008, Vol. 29, p. 664-677. (Eng.)
Abstract views: 180 PDF Downloads: 124
If the article is accepted for publication in the journal «Industrial Heat Engineering» the author must sign an agreementon transfer of copyright. The agreement is sent to the postal (original) or e-mail address (scanned copy) of the journal editions.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License International CC-BY that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.