FEATURES OF HEAT TRANSFER IN A FLAT POROUS MICROCHANNEL WITH THE SECOND ORDER SLIP BOUNDARY CONDITIONS


  • A.A. Avramenko Institute of Engineering Thermophysics of the National Academy of Sciences of Ukraine
  • N.P. Dmitrenko Institute of Engineering Thermophysics of the National Academy of Sciences of Ukraine
  • Yu.Yu. Kovetska Institute of Engineering Thermophysics of the National Academy of Sciences of Ukraine
  • O.I. Skitsko Institute of Engineering Thermophysics of the National Academy of Sciences of Ukraine
Keywords: heat transfer, microchannel, porosity, permeability; slip boundary conditions of the first and second order.

Abstract

The results of the study of heat transfer under forced convection in a flat porous microchannel taking into account the boundary conditions of slippage of the first and second order are considered.

The simulation showed that with decreasing porosity the flow velocity in the central part of the microchannel and the slipping velocity on the wall decrease due to the increase in hydrodynamic resistance. Taking into account the influence of the boundary conditions of the second order shows that the magnitude of the velocity jump on the wall varies depending on the value of the parameter A2. The jump decreases with a positive value of A2, with a negative value - increases in comparison with the case A2 = 0 (first order boundary conditions).

Qualitatively similar effects of porosity and second-order boundary conditions were also observed with respect to temperature profiles.

The results of the calculation of the relative Nusselt number showed that the decrease in porosity contributes to the intensification of heat transfer.

The dynamics of the change in the heat transfer coefficient with an increase in the Knudsen number indicates that an increase in the Prandtl number also leads to an improvement in the thermal interaction of the flow with the channel wall. The analysis of taking into account the boundary conditions of the second order showed that at small values of the Prandtl number (Pr ≤ 1) the influence of the parameter A2 was not observed. At A2 < 0 the effects of the boundary conditions of the second order lead to an increase in the relative Nusselt number, whereas at A2> 0 the value of the normalized Nusselt number decreases in comparison with the case A2 = 0 (boundary conditions of the first order).

References

1. Hassanizadeh S.M. Theory and Applications of Transport in Porous Media. Springer International Publishing. 2017. https://www.springer.com/series/6612.
2. Vafai K. Porous Media: Applications in Biological Systems and Biotechnology. Tokyo: CRC Press. 2010. 632p. https://doi.org/10.1201/9781420065428.
3. Cruz-Duarte J. M., Garcia-Perez A., Amaya-Contreras I. M., Correa-Cely C. R. Designing a microchannel heat sink with colloidal coolants through the entropy generation minimisation criterion and global optimization algorithms. Appl. Therm. Eng. 2016. V.100. P.1052 – 1062. DOI: 10.1016/j.applthermaleng.2016.02.109.
4. Insoo Leea, Pyohwan Hong, Chanseob Choa, Byeungleul Leec, Kyunghan Chund, Bonghwan Kimd. Four-electrode micropump with peristaltic motion. Sensors and Actuators. 2016. V.245. P. 19 –25. DOI: 10.1016/j.sna.2016.04.010.
5. Liedtke A. K., Scheiff F., Bornette F., Philippe R., Agar D. W., and Bellefon, C. Liquid–Solid Mass Transfer for Microchannel Suspension Catalysis in Gas–Liquid and Liquid–Liquid Segmented Flow. Ind. Eng. Chem. Res. 2015. V. 54 (17). P. 4699 – 4708. https://doi.org/10.1021/ie504523y.
6. Avramenko A. A., Tyrinov A. I., Shevchuk I. V., Dmitrenko N. P., Kravchuk A. V., Shevchuk V. I. Mixed convection in a vertical flat microchannel. International Journal of Heat and Mass Transfer. 2017. V. 106. P. 1164 – 1173. DOI10.1016/j.ijheatmasstransfer.2016.10.096.
7. Avramenko A. A., Kovetska Yu. Yu., Shevchuk I. V., Tyrinov A. I., Shevchuk V. I. Mixed Convection in Vertical Flat and Circular Porous Microchannels. Transport in Porous Media. 2018. V.124. P. 919 – 941. DOI10.1007/s11242-018-1104-4.
8. Avramenko A. A., Tyrinov A. I., Shevchuk I. V., Dmitrenko N. P. Dean instability of nanofluids with radial temperature and concentration non-uniformity. Phys. Fluids. 2016. V. 28(3). P. 034104-1 – 034104 – 16. https://doi.org/10.1063/1.4942896.
9. Kovetska Yu.Yu., Skitsko O.I., Sorokina T.V. [The instability of slipping flow in a curvilinear porous microchannel]. [Industrial Heat Engineering]. 2018. V.40, №3. P. 20 –25. https://doi.org/10.31472/ihe.3.2018.03. (in Rus.)
10. Guckenheimer J., Holmes P.J. Nonlinear Oscillations, Dynamical Systems and Bifurcations of Vector Fields. Springer 1st ed. 1983. Corr. 6th printing 2002 Edition. P. 462 p. ISBN 978-1-4612-1140-2.
11. Dongari N., Agrawal A., Agrawal A. Analytical solution of gaseous slip in long microchannels. International Journal of Heat and Mass Transfer. 2007. 200750. P.3411–3421. DOI: 10.1016/j.ijheatmasstransfer.2007.01.048.
12. Xiao N., Elsnab J., Ameel T. Microtube gas flows with second order slip flow and temperature jump boundary conditions. International Journal of Thermal Sciences. 2009. V. 48. P. 243 – 251. https://doi.org/10.1016/j.ijthermalsci.2008.08.007.
13. Beskok A., Karniadakis G.E. A model for flows in channels, pipes and ducts at micro and nano scales. Microscale Thermophysical Engineering. 1999. V.3. P. 43 – 77. DOI: 10.1080/108939599199864.

Abstract views: 31
PDF Downloads: 23
Published
2021-03-16
How to Cite
Avramenko, A., Dmitrenko, N., Kovetska, Y., & Skitsko, O. (2021). FEATURES OF HEAT TRANSFER IN A FLAT POROUS MICROCHANNEL WITH THE SECOND ORDER SLIP BOUNDARY CONDITIONS. Thermophysics and Thermal Power Engineering, 43(2), 5-12. https://doi.org/https://doi.org/10.31472/ttpe.2.2021.1
Section
Heat and Mass Transfer Processes and Equipment, Theory and Practice of Drying